SPRING AIR MATTRESSES
Queen Sets Start At Just $399

For 80 years, Spring Air has combined
Old World craftsmanship with the latest in pressure-relief and support technology to make the best mattress for you.

 

 

Your Back Never Felt So Good™

 

With the recent trends in exercise, Americans are placing more emphasis on physical activity than ever before. As a result, Americans are also placing more stress on their backs than ever before. That is why Spring Air has created a mattress designed specifically for on-the-go individuals like you who demand superior comfort and support for your back.

 
And for those interested in the premium Back Supporter models, we offer the exclusive Total Balance™ Dual Gauge Coil System for enhanced lumbar support.

 

There are too many places in our lives where can cut corners.  Selecting a mattress on which you will spend six to eight hours of virtually every day of your life is not one of those places.  Therefore, we do not and will not sell our customers a “cheap” mattress which will be detrimental to their health.  We offer eleven supreme quality innerspring mattress sets to insure that you will have no problem finding one that matches your comfort requirements and queen sets are priced as low as $399.

How To Buy A Mattress

Too many people make selecting a new mattress way too complicated.  Construction, although important, is not the most important thing.  Does it really matter how many coils a mattress has if it is not comfortable?  No.  Comfort is the most important thing one needs to consider when mattress shopping.  Leave your inhibitions at home.  Wear something comfortable so you can lie down and roll around on every mattress in the store.  Simply use the process of elimination.  Pick any two mattresses and compare them.  When you decide between those two which one you like, compare that one to another.  Keep comparing one mattress to another until you have eliminated all but one.  It’s no harder than that.

Mattress Construction
The following information is adapted from The Better Sleep Guide, a free brochure from the Better Sleep Council's "Consumer Information Series."  A mattress is made of three basic elements:

  • The foundation acts as a giant shock absorber, taking the normal wear and tear of nightly use. Foundations also lend added support, durability and, in the case of adjustable beds, flexibility.  The mattress core construction varies with the type of mattress. Whether the mattress is made of springs, air, foam, or water, this middle "core" provides support for the sleeper.
  • The upholstery layers wrapped around the core provide surface comfort. A variety of foams and fibers are used to improve cushioning properties and enhance the support of the mattress core.

Sleep Set Advances
Because of technological advances and medical developments, today's mattress sets are not the same as those made 10 years ago. Industry research and development has improved mattress and foundation engineering to provide optimum comfort and support. A new sleep set that incorporates these advances can lead to a better night's sleep. Now that you are aware of the ins and outs of the sleep set of your dreams, it's time now to know the six shopping musts for a mattress. The following information is adapted from The Better Sleep Guide, a free brochure from the Better Sleep Council's "Consumer Information Series."

  • Support. A quality mattress and foundation will gently support your body at all points and keep your spine in the same body position as good standing posture. When selecting a mattress, keep in mind that your body should be able to relax, with your spine supported in its natural curve. Otherwise, your muscles work all night and you'll wake up stiff and sore.
  • Comfort. Mattresses don't have to be as hard as a board to be good for you, though some people may prefer a firmer feel. Today's mattresses are built with luxurious new cushioning materials and surface treatments, creating a feel that is more plush.
  • Durability and Warranty. Durability refers to how long support and comfort will last. Like all products, mattresses and foundations gradually wear out. That's why you should reevaluate your sleep set annually. The warranty protects you against product defects and workmanship mistakes, not gradual loss of comfort and support.
  • Space. Select a new mattress that gives you enough room for easy, free movement, especially if you're sleeping with a partner. Couples should select a queen- or king-size mattress to ensure that both people have enough space.
  • Matching Sleep Sets. Matching mattresses and foundations are designed to work together. Mismatching sets, putting a new mattress on an old foundation or adding a board between the mattress and foundation can impede comfort and reduce the life of the mattress.
  • Value. Buy quality products made with all new materials. Shopping for the best value, not the lowest price, is often a smart way to shop.


 

Warranty Information

What is Covered?

Mattress...
Body impressions greater than 1-1/2"
Coils or wires that are loose, broken, or protruding through the mattress fabric

Foundation...
Splitting of the wood frame, wood or defective, loose, or bent beams.

Support...
Your mattress and foundation must be supported by an appropriate bed frame at all times (see illustration below) for warranty coverage.

 

What is not Covered?

 

  • Spring Air is not liable for incidental or consequential damages that result through the use of this product.
  • Normal body impressions up to 1-1/2" (Body impressions are caused by upholstery material compressions and are normal characteristics of premium bedding. Body impressions up to 1-1/2" are not considered to be a structural defect.)
  • Clearance bedding, "as is" bedding, or floor models.
  • Damage or bending to perimeter border rods caused by bending or incorrectly moving the sleep set
  • Bed handles and cover fabrics
  • Damage to mattress fabrics due to soiling, stains, or burns
  • Comfort level/preference
  • Bed height
  • Damage to the mattress due to an incorrect or old foundation
  • Structural damage caused by an incorrect bed frame
  • Corner guards
  • Sheet fit


THIS WARRANTY SHALL BE EXCLUSIVE AND SHALL BE IN LIEU OF ANY OTHER EXPRESS WARRANTY, WRITTEN OR ORAL, INCLUDING BUT NOT LIMITED TO ANY EXPRESS WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS EXPRESSLY LIMITED TO THE APPLICABLE PERIOD OF DURATION OF THIS LIMITED WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. THE CUSTOMER'S EXCLUSIVE REMEDY FOR BREACH OF THIS WARRANTY OR OF ANY IMPLIED WARRANTY OR OF ANY OTHER OBLIGATION ARISING BY OPERATION OF LAW OR OTHERWISE SHALL BE LIMITED AS SPECIFIED HEREIN TO REPAIR OR REPLACEMENT, AT OUR SOLE OPTION. IN ANY EVENT, RESPONSIBILITY FOR SPECIAL, INCIDENTAL AND CONSEQUENTIAL DAMAGES IS EXPRESSLY EXCLUDED. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may have other rights, which vary from state to state. WARRANTY APPLIES TO ORIGINAL PURCHASER OF MATTRESS SET ONLY.

 

Guidelines

This warranty does not cover claims resulting from (i) misuse or neglect; (ii) damage caused by the use of an incorrect bed frame (and, in the case of King- and Queen-size mattresses and/or foundations, damage caused by failure to use a bed frame or bed rails with rigid cross supports and at least one center leg that extends to the floor); (iii) damage to mattresses due to an incorrect or old foundation; (iv) damage to mattress fabrics due to soiling, stains or burns; (v) normal body impressions (1-1/2 inch or less); (vi) improper sheet fit; (vii) unauthorized service during the warranty period on conditions otherwise covered by warranty; or (viii) damages resulting from the failure to observe the instructions set forth in the enclosed Mattress Set Care Guide, under the heading "Do's & Don'ts."

  • During the warranty period, your Spring Air mattress and/or foundation will be repaired or replaced at Spring Air's discretion.
  • Replacement of one piece in your mattress set does not automatically mean that the other piece will be replaced.

 

 

 

How to Obtain Service for your Spring Air Product

If a defect appears during the warranty period, we will (at our sole discretion) repair or replace the defective Product with charges for service or parts calculated as provided in the Limited Warranty Schedule, provided the Product is delivered, at the customer's expense, to the nearest Spring Air Factory with proof of purchase, a description of the defect, and the Law Label intact. If identical materials or an identical mattress is not available, we reserve the right to substitute materials of equal or higher quality as necessary. We reserve the right to refuse warranty service for mattresses and/or foundations found to be in an unsanitary condition. The Products are warranted for the original owner from the date of purchase. Should the Products need to be repaired or replaced at some point during the warranty coverage, coverage is not renewed or extended, rather, the expiration date for warranty coverage is measured from the original date of purchase.

  • If defect appears, it should be reported immediately to the Spring Air dealer from whom the product was purchased, or if not available, to the nearest Spring Air factory.
  • Do not return the product until you have received approval and transportation arrangements from the Spring Air dealer or factory.
     *  All transportation costs must be prepaid by the purchaser.

 

 

 

Manufacturer's Limited Warranty


Spring Air warrants your new Spring Air mattress and foundation (the "Products"), except for bed handles, cover fabrics and corner guards, to be free from defects in material and workmanship ("defects") existing at the time of manufacture and appearing within the applicable warranty period set forth in the Limited Warranty Schedule below.
The term of warranty coverage you will receive and the fee, if any, you may be charged for warranty service depends upon the specific Spring Air Product purchased. PLEASE REFER TO THE NON-REMOVABLE TAG LOCATED AT THE HEAD OF YOUR MATTRESS ("LAW LABEL") FOR THE WARRANTY CODE TO BE USED WITH THE LIMITED WARRANTY SCHEDULE BELOW. The Law Label is your Product identification record and should not be discarded.

 

 

Warranty Code on Law Label Tag

Warranty Period (from Date of Purchase)

Period of Time from Purchase for No Charge Repair or Replacement

Calculation of Charges for Repair or Replacement During Warranty Period Beyond No Charge Period

A

1 year

1 year

N/A

C

5 years

1 year

1/5 of dealer's regular retail price (at time of claim) multiplied by the number of years of use

D

10 years

1 year

1 /10 of dealer's regular retail price (at time of claim) multiplied by the number of years of use

M

15 years

15 years

N/A

N

10 years

10 years

N/A

O

5 years

5 years

N/A

P

10 years

5 years

1/10 of dealer's regular retail price (at time of claim) multiplied by the number of years of use.

 

 


 

 

NeverTurn™ One-Sided Mattress
 To help equalize body impressions, please rotate your mattress as part of the maintenance of the sleep product. Rotate your mattress every two weeks for the first six months. After this period, rotate it every two or three months.

Easy Steps for Rotating a NeverTurn™ Mattress

1. Push at the opposite corners A and B while your mattress is lying flat.

2. Push alternately on corners A and B to position mattress on foundation.

3. And there you are...rotated end to end.

 



Two-Sided Mattress
 Turn the mattress over, end to end and side to side EVERY TWO WEEKS for the first six months. After this period, turn it every two or three months.

1. BEGIN with your mattress lying flat.

2. ROTATE your mattress so it hangs over foundation.

3. RAISE and TURN your mattress over side to side.

4. ROTATE your mattress back into position.

5. Your Spring Air mattress is now ready for another good night's rest.

 


 

 

Dos & Don'ts top of page | warranty home


DO...

 


DON'T...
  • DO rotate your mattress occasionally to help maintain and prolong the quality/comfort of your mattress. Body impressions are caused by upholstery material compressions and are normal characteristics of premium bedding. Such body impressions indicate that the upholstery layers in your mattress are conforming to your individual body shape. Body impressions up to 1-1/2" are not considered to be a structural defect.
  • DO replace your old foundation when you purchase your new mattress to help provide the proper support of your new mattress.
  • DO use a quality bed frame to support your mattress and foundation. If you have a Queen- or King-size bed, your bed frame must have a center support that extends to the ground in order to obtain warranty protection.
  • DO use a mattress pad to help preserve the surface quality of your mattress, especially if children use the bed.
  • DO NOT smoke in bed or expose your mattress to an open flame. While this mattress is manufactured, as required by federal law, to resist ignition from a lighted cigarette, it is not flame or fireproof.
  • DO NOT attempt to rotate the mattress by yourself. To avoid damage to the mattress or the risk of personal injury, have someone help you rotate your mattress.
  • DO NOT fold, bend, or stand on your mattress.
  • DO NOT remove the law tag label attached to the end of your mattress. This tag helps identify and establish your warranty rights.
  • DO NOT use dry-cleaning-type fluid of any kind on your mattress. Such chemicals will damage components of your mattress.
  • DO NOT place a board in between your mattress and foundation since this negates the effect/purpose of your foundation.
  • DO NOT allow the mattress or foundation to get soiled or in unsanitary condition. This will void the warranty.